INCOFLUXR NT120 埋弧焊剂 烧结焊剂 |
价格:1 元(人民币) | 产地:美国 | |
最少起订量:1公斤 | 发货地:上海 | |
上架时间:2018-01-04 09:28:51 | 浏览量:426 | |
午虎特种合金(上海)有限公司 | ||
经营模式:生产加工 | 公司类型:私营股份有限公司 | |
所属行业:进口焊条 | 主要客户:全世界 | |
在线咨询 |
联系人:蔡玉兰 (小姐) | 手机:18117348636 |
电话: | 传真: |
邮箱:18117348636@163.com | 地址:泗砖路600号 |
INCOFLUXR NT120 埋弧焊剂
INCOFLUX NT120 埋弧焊剂是一种烧结焊剂,设计与INCONEL 622、INCO-WELD C276/686CPT焊丝匹配使用,这些焊丝都是耐蚀的镍-铬-钼-钨合金材料。这种焊剂的典型应用是与焊丝化学成分相近的母材金属自身之间或与铁素体金属材料之间的开坡口焊接。这种焊剂与焊丝的匹配也可用于很多种耐蚀含钼合金例如904L、316、317合金以及双相不锈钢和C-276、C-22、622、59、C-2000合金的焊接。这种焊剂的另一个主要应用是与NiCrMoW填充金属相匹配,在碳钢表面堆焊形成耐蚀耐氧化层。
储藏和干燥条件 焊剂密封在未开启的容器中可以无限期保存。如果焊剂暴露于潮湿环境中,可以在500oF保温烘干2小时或600oF保温烘干1小时后使用。
The INCOFLUX NT120 submerged arc welding agent is a sintering flux which is designed to match INCONEL 622, INCO-WELD C276/686CPT welding wire, which are corrosion-resistant nickel-chrome-molybdenum-tungsten alloy materials. The typical application of this flux is to weld the metal itself between the metal itself of the wire or the metal material of the ferrite metal. The solder and wire matching can also be used in many kinds of corrosion - resistant, molybdenum alloys such as 904L, 316, 317 alloys and double - phase stainless steel and c-276, c-22, 622, 59, c-2000 alloy welding. Another major application of this flux is the matching of NiCrMoW filled metal to the surface of carbon steel. Welding parameters: open groove welding or surfacing: apply DCEP current and narrow weld path Electrode dry extension flux layer thickness of wire diameter current/ampere voltage/v welding speed electrode 0.062 in 1.6 mm 240-290 30-33 8-11 in/min In 200-280 - mm/min 7/8-1 1/2-1 in 22 to 25 mm 13 to 25 mm 0.093 in 2.4mm 250-300 30-33 8-11 in/min In 200-280 - mm/min 7/8-1 22-25 mm 3/4-5/4 in 19 to 32 mm Electrode swing surfacing welding: the use of DCEN current mode, when the wire diameter is 0.062 in, the oscillation frequency is 50-70 weeks/min; When the wire diameter is 0.093 in, the oscillation frequency is 35-50 weeks/min 0.062 in 1.6 mm 240-2632-34 4 in/min 100 mm/min in 7/8-1 1/2-1 in 22 to 25 mm 13 to 25 mm 0.093 in 2.4mm 300-400 34-37 4 in/min 100 mm/min in 7/8-1 22-25 mm 3/4-5/4 in 19 to 32 mm Storage and drying conditions The flux seals can be kept indefinitely in unopened containers. If the solder is exposed to wet conditions, it can be used after an hour of thermal insulation drying for 2 hours or 600oF. Flux particle size Taylor's mesh: 10 by 60 packaging The barrel cover is covered with a 60 - pound polyethylene barrel sealed with rubber gasket |
版权声明:以上所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。机电之家对此不承担任何责任。 友情提醒:为规避购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。 |